Product Information
Thrunite T30S ( 650 ANSI lumen )
Delivered Free Throughout Australia via Express Post
Specification
-LED: Cree XM-L U2 LED with a lifespan of 20+years of run time.
-Max 650 lumens output using 2 * CR123A or 1 * 18650 batteries. ( Batteries Not Incliuded )
-High: 650 lumens.2.2 hours.Mid: 150 lumens.7.3 hours
-Low: 9.4 lumens.95 hours. Strobe: 650 ANSI lumens.4.5 hours.
-Working voltage: 3.3v to 8.4v.
-Removable steel pocket clip.
-Max runtime: 95 hours.
-Max beam distance: 250 meters.
-Peek beam intensity: 15000cd.
-Impact resistant: 1.2meters.
-Waterproof to IPX-8 standard.
-144.00mm length, 35.00mm bezel diameter.
-Weight: 159.60g without battery.
-Aircraft grade aluminum body structure.
-Premium type III hard anodized anti-abrasive finish.
-Ultra-clear tempered glass lens with anti-reflective coating.
-Momentary forward click tactical switch.
-Programmable memory function.
-Strobe mode for tactical and emergency use.
-Low, medium and high modes to balance power consumption and light output.
-Stainless steel front bezel.
-Smooth reflector for max light output.
-Highly focused beam for maximum distance.
-Tactical knurling for firm grip.
-Sreamlined body design.
-Reversed polarity protection.
-Durable T-shaped thread.
-Side switch on tail cap for direct access to strobe from power-on and changing modes from power-off for Military and Tactical Application.
Operation:
To Power on/off the light:
Press the tail cap half way to momentary activate the light ,completely press the tail cap to click,the light will stay on.
Push the tail caqp again to click, the light will go off.
Mode Switch
Clicking the side switch when power-on cycles modes through low, medium, high and strobe.
Direct Strobe Access
Pressing the side switch when power-off activates strobe mode directly.
Battery Installation
Take off the tail cap, insert the battery with the positive toward the LED assembly(head of the light), install the tail cap and tighten all the way to operate the light.
Usage and Maintenance
Disassembling the sealed head may damage the product and will void the warranty.
Use top quality batteries, lesser quality batteries may explode and will most likely leak and damage the light beyond repair thus voiding the warranty.
ThruNite is not liable for any damages or injuries caused by exploding batteries.
Please do not mix different brands of batteries, partially used with fresh batteries.
Gently clean contacts between batteries, and light with Q-tip cleaning alcohol, let it dry before reassembling the light.
Replace damaged o-ring and lubricate with silicone lubricate.
In case of light failure, replace with new batteries. If problem persists, clean the contacts and gently tighten the threads. If the light still does not work, contact your vendor or ThruNite office for warranty service.
Warning
High output and strobe modes may cause eye damage, as well as seizures, ThruNite is not responsible for improper
Delivered Free Throughout Australia via Express Post
Brand/Manufacturer: ThruNite
We ship by Express Post free of charge
